Recently, GINTEC have released a new data logger DCT20S! DCT20S Data Logger is designed and developed by GINTEC and is a Low power consumption & cost-saving solution for geotechnical field. It can be widely used in geotechnical engineering projects, such as foundation pit, landslide, mining exploration, tunnelling, structural health monitoring,etc. It supports Vibrating Wire sensors, Current sensors, Voltage Sensors and 485 sensors. DCT20S is also capable to verify frequency through handheld readout. DCT20S has 8 local channels in default. It can be expanded to 32 channels. All the channels support VW & Voltage & Current & 485. Integrated with 4G module, DCT20S can transmit data to TCP server directly, do not need use any gateway. Customer also can manage DCT20S remotely with cloud software (Run it in any Web Browser). Config...

From November, 2022, GINTEC launches a new handheld controller, P9IV. Distinctively, P9IV is designed ergonomically to be served as a comfortable controller conforming to common user habits. With 5.0 inch HD touch screen, it has only 28 keys and 2 indicators, but meets all operational requirements on data collection during surveying, mapping and monitoring. Besides, made of magnesium alloy in industrial grade, P9IV is rugged enough to be used in tough field work for long duration. ________________________________________________________________________________________________  ...

  Geodetic and precise GNSS measurements make the exact knowledge of the reception characteristics of the used GNSS antennas and therefore a calibration necessary. With the pursuit of high precision of products, GINTEC entrusted the third party, GeoService GmbH, to do antenna calibration on  G20M(New) and G30, corresponding to the certification name GING20M NONE and GING30 NONE.    Robot-based Geo++R-GNPCV Real-Time Calibration is applied to get absolute GNPCV Type Mean. Absolute PCV acquired contain the following characteristics: absolute 3D offsets, absolute PCV, PCV from 0° to 90° elevation, elevation and azimuth dependent PCV, free of any multipath influence. The resulting PCV are completely independent from the used reference antenna and allow the complete modeling of the receivi...

Krithi Engineering, GINTEC’s exclusive distributor, moved to its own new office building recently. Krithi Engineering established in 2016, located in Hyderabad, has achieved a remarkable position in surveying industry. GINTEC has cooperated with Krithi Engineering since 2021. The sales volume of G20, G20M, and G30 has achieved aconsiderable amount in India through Krithi Engineering.Adhering to the concept of “Based on Integrity, Success in Quality", GINTEC dedicates to providing high-quality and competitive products to customers. In the future, GINTEC will continue long-term cooperation with Krithi Engineering.  GINTEC will continuously move forward to upgrade GINTEC products in order to enhance users’ experience. We will grow up and make progress with our partners together. In addition, GINTEC her...

Since the launch of GINTEC G30, we have received good comments from customers in many places.Thanks for the recognition of our new product and support to our company from our lovely customers.   We will more actively study various technical improvement suggestions from customers, improve quality and efficiency, and constantly optimize products to ensure quality. We hope we can continue to be recognized by the market in the future.  By the way, we are about to launch a new product G30PRO with BD990 board,  which will be a high-end product to meet the needs of high-precision measurement. Let's look forward to its coming!   __________________________________________________________________________________________________________________________________...

  How time flies, the busy 2019 is going to an end and the year of 2020 is coming.   A New Year brings new goals and hopes, under the leadership of General Manager Mr. Zhang, GINTEC 2019 dinner activities was held in Qingyuan Mei Lin lake on Christmas day, December 25th. This year the dinner is special, all the dishes are cooked by ourselves: making dumplings together, cooking special dishes of respective hometowns, together with the wine that Mr. Zhang brought, which make the whole meal enjoyable.     Through the dinner activities, it deepens the relationship between colleagues, promotes the communication and cooperation among the team. Meanwhile, it also enables us to relieve pressure from the intense work, relax their body and mind, which helps us in the future with a better mental outlook to put into every day’s work. ________________...

  Last week, we went to Turkey to visit our customers and provided them with technical support. We spend five days helping our partner solve a tough problem and get a big client.Our old friends acknowledged our technical capabilities, and expressed full recognition of the quality of our products. After this visit, we believe that our cooperative relationship will be even stronger in the future.   ________________________________________________________________________________________________  ...

We GINTEC attended the INTERGEO exhibition in Stuttgart, Germany on September 17-19, 2019. Our exhibition was held successfully and the overall exhibition effect was very good.   In this exhibition, we launched a serial of new products including RTK F80/F90(IMU), SDM Wireless Vibration Tiltmeters, Deformation Monitoring System, UAV system and total station etc. Customers show great interest in them and hope to buy some samples for testing and market promoting, which gave us more confidence and support.   We have booked Berlin INTERGEO 2020, welcome your coming.   ________________________________________________________________________________________________  ...

  The Turkey customers are very satisfied with the performance of our CY F90.   ________________________________________________________________________________________________