Problems We Met and Fixed in Netherlands Project

发布于: 2021-11-29 16:23

Recently our customer from Netherlands has a monitoring project. The ADMV Array Flexible Inclinometer need be installed at a harbour to monitor quay wall. Before installation, before construction, it has several serious questions, we fixed them one by one. Finally, one 36.5m chain of ADMV was installed, and the data is very stable.

Question 1: There is no standard inclinometer casing, it only has a metal pipe, its inside size is 30mm*30mm, does ADMV can be installed inside?

 

Answer: The maximum diameter of ADMV is 25mm, it’s no problem.

 

Question 2: Party A doesn’t allow to install solar devices on site. All the logger must be put in a special control room, it’s 700m far away from site. It will use a 700m cable to supply power and acquire data. Does this affect data acquisition?

Answer: For this project, we update the hardware of our C2000 logger. Normally, the output voltage of C2000 is 9V. We increase the output voltage to 20V, then it works with 700m cable normally. For the extend cable, customer purchased in local market, the cable should be “Shielded Twisted Pair”.

 

Question 3: Is it necessary to prepare a computer in the control room to calibrate raw data?

Answer: Needn’t. C2000 logger has Linux system on it. You can treat C2000 as a small computer, we already install Calibrate Tool on C2000. So C2000 can calibrate raw data automatically. It will output X,Y,Z coordinates directly.

 

Question 4: We have our own cloud software, is it difficult for our software to use your data?

Answer: No, it’s very simple. C2000 has 4G module inside, it can send data with 4G directly. And the data can be saved in FTP/SFTP/FTPS server with .CSV format. Your software only needs to read the data in CSV.

 The folder path is: SFTP Folder/Serial number of C2000/Serial number of ADMV/Year/Month. For example, Serial number of C2000 is HS421900008, the serial number of ADMV is 901248. I want to check the data in September, then its path isSFTP Folder/HS421900008/901248/2021/09

 

The device was installed in 12th October, the data is stable, ADMV successfully starts to show deformation trend.

 

 

ASSOCIATED PRODUCTS

                       

                Flexible Inclinometer                                             Data Logger                                                                      Monitoring Cloud Platform

__________________________________________________________________________________________________________________________________

分享

推荐文章

  • 08-29 2025
    GINTEC
    Under the EU's new cybersecurity regulations, we have taken the lead in obtaining certification, ensuring seamless product trade for you. Recently, our G50 Laser RTK product has successfully passed the EU EN 18031 cybersecurity certification, making it one of the first products in the industry to meet this mandatory standard. This certification signifies that G50 Laser RTK has achieved the highest EU standards in cybersecurity, data privacy protection, and anti-fraud capabilities, providing a solid foundation for continued sales and import in the European market. 01 EU New Regulations: EN 18031 Certification Becomes Key to Market AccessThe European Commission adopted the supplementary delegated regulation (EU) 2022/30 in 2022, explicitly requiring radio equipment to meet cybersecurity, privacy protection, and anti-fraud requirements. In January 202...
  • 08-27 2025
    GINTEC
    Geodetic and high-precision GNSS measurements require accurate knowledge of the reception characteristics of the GNSS antennas used, making antenna calibration essential. In pursuit of superior product accuracy, GINTEC entrusted the third-party organization GeoService GmbH to perform a professional calibration on its G50 antenna (certification name: GING50 NONE). The calibration employed the robot-based Geo++® R-GNPCV real-time calibration system to obtain an absolute mean GNSS Phase Center Variation (PCV) type. The acquired absolute PCV data includes the following features: absolute 3D offsets, absolute PCV values, PCV from 0° to 90° elevation, elevation- and azimuth-dependent PCV, and is entirely free from multipath effects. The resulting PCV values are independent of the reference antenna used and enable comp...
  • 08-26 2025
    GINTEC
    GINTEC is proud to announce the launch of the All-New P3, a major upgrade to its Android Controller. This iteration combines breakthrough performance, professional-grade durability, and industry-specific software integration to redefine mobile productivity for outdoor surveying and mapping professionals. Next-Level Performance: MT8788 + Android 14 for Seamless SpeedThe All-New P3 is powered by the MediaTek MT8788 processor, delivering nearly double the performance of its predecessor. Paired with the Android 14 system, it ensures ultra-fast multitasking, stable operation, and energy efficiency, even under heavy workloads. Built for the Field: 800 Nits Display + 9000mAh BatteryEngineered for demanding environments like surveying and engineering inspections, the device features a sunlight-readable 800 nits display and a 9000mAh battery for around 20 hou...